// 49AC150-12

Print PDF

Air Cargo Lift Premium Features

• All scissors rollers are captured within structural steel channels to provide excellent load stability.
• High impact, spiral wound bearings at every pivot point provide maintenance-free, rugged resistance to abrasion, impact, and uneven loads.
• Structural cross-members at every pinned joint in the scissors assembly minimizes leg deflection due to twisting or spreading under high/uneven loading.
• All hydraulic cylinders contain two-piece, self-aligning piston rods that transmit minimal side forces to the cylinder hinges/pins, significantly reducing wear.
• Structural steel channels in all upper and lower frames provide additional rigidity and resistance to twisting and bending of the lift under load.
• Tubular steel legs and added stiffeners provide overall stability and straight, repeatable tracking of the rollers as the lift raises and lowers.
• Joints, the most critical wear points in the lift, feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
• Minimum 1/4-inch-thick steel-reinforced platform minimizes deck deflection, maximizes load stability, and greatly extends the life of the platform deck.

Maintenance and Warranty

• Autoquip offers an industry-best 2 year warranty on all parts as a promise that you've purchased the industry's most reliable scissor lift.
• One-piece, removable center axle pin adds rigidity to the scissors mechanism and allows easy inspection and maintenance of the axle pin - a task that is virtually impossible on competing brands.
• On-board maintenance devices enable maintenance crews to safely and effectively block open the scissors during inspection and routine maintenance.
• Sturdy, semi-transparent polyurethane oil reservoir provides an easily visible method of checking fluid levels and eliminates oil contamination due to rust.
• Low pressure hydraulic circuit extends the life of all hydraulic components and puts less stress on the electric motor.
• Double wire braided Parker hydraulic hoses resist wear, abrasion, and leaks.
• Sturdy, semi-transparent polyurethane oil reservoir provides an easily visible method of checking fluid levels and eliminates oil contamination due to rust.

Simplicity

• Roller conveyor tops minimize lateral forces required to push containers across the transfer deck.
• Optional floating truck bumper prevents damage and keeps the lift in optimal operating condition.
• Manual pallet stops are easily engaged & disengaged.

Safety

• Hydraulic velocity fuses completely stop lifts in the unlikely event of uncontrolled descent due to sudden hose rupture.
• Pallet stops on loading and unloading sides prevent containers from unexpectedly rolling off a raised lift.
• Redundant hydraulic pump units allow continued operation of the lift should the primary unit fail unexpectedly.
• Manual down valve is included in the hydraulic circuit, allowing a raised lift to be lowered in the event of power failure.
• Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
• Compliance with recognized national standards:
  • ANSI MH29.1 - Safety Requirements for Industrial Scissor Lifts
  • NFPA 70 - National Electric Code
  • ASTM - A36 - Structural Steel Standard
  • ANSI Z535 - Safety Labeling Requirements
  • AWS D.1 - Welding Standards
  • Applicable portions of OSHA 29CFR1910 - General workplace safety