need help? 877-360-6777
Home / Case Study
Print PDF

// Case Study

High Capacity Paper Roll Lift

Paper manufacturer utilizes unique four-post hydraulic lift used for transferring fork trucks and/or multiple rolls of paper between two fixed landings.

The Challenge

A method of moving up to six (6) rolls of paper between the production floor and the storage level above, each roll weighing approximately 5,500 pounds. Also, on occasion, they wanted to move a fork truck between levels, with or without rolls of paper. The current method of moving fork trucks or rolls of paper between levels was to drive outside and around the building on the sloped parking lot. GP needed a design solution that was: 1) extremely robust – as it would experience a lot of traffic and heavy loads, 2) extremely large – to accommodate the total number of rolls of paper they wanted to move at one time, and 3) essentially free-standing, as the lift structure would be placed in the factory adjacent to a raised mezzanine, but not structurally tied to the mezzanine.

The Autoquip Solution

Autoquip met with its equipment distributor and representatives from Georgia Pacific to review performance specifications and drawings of the factory floor plan. A special high capacity, hydraulic 4-post vertical reciprocating conveyor (VRC) was ultimately recommended because of its ability to convey large, heavy loads over high vertical travels, and its virtually self-supporting lift structure. This unique lift would be raised and lowered by four large, direct-acting cylinders – one at each corner of the lift. The four cylinders were synchronized in motion by a hydro-mechanical system that consisted of high-efficiency flow dividers/combiners at the 40HP pump unit, and a rack and pinion system mounted beneath the main carriage which helped to time the four corners – especially in the event that the carriage experienced an off-center load. Pneumatically-powered deck locks were mounted to the guide beams adjacent to the elevated mezzanine and would swing out on demand to help support the carriage as heavy fork trucks enter and exit the lift while in the raised position. Safety features included a carriage free-fall arrest system, interlocked access doors, and personnel guarding in compliance ANSI B20.1. Lift Specifications for this heavy duty application: • Lifting Capacity: 35,000 lbs. live load • Axle Load Capacity: 26,000 lbs • Vertical Travel: 360" • Platform Size: 68" x 264" • Lifting Speed: 17 FPM • Hydraulic Power Unit: 50HP/460VAC • Actuation: Hydraulic – with Hydro-mechanical synchronization

Solution Benefits

The completely custom-designed, high-capacity, high-impact lift has improved efficiency in transferring rolls of paper and increased overall throughput of the factory.

Published: 08/30/2012
Tags: Hydraulic Lifts , High Travel Lifts , High Capacity Lifts , Custom Lifts , Coil Handling , Mezzanine , Printing & Paper , Pallet Handling , Freight Lifts

With the largest selection of lifts, Autoquip can provide you with the lift you need. To request a quotation please click here.

Autoquip is ready to answer your questions and assist you. Click here to find the person at Autoquip who can help you best.

Terms of Use    Privacy Statement    Site Map

© Autoquip Corporation. All rights reserved. If you have a special requirement, contact Autoquip at or call toll-free 877-360-6777.